Important Security Information - Eaton Power Xpert 1000 Series User Manual

Important Security Information

EATON Power Xpert
® Gateway Series 1000 Card User's Guide
5. If you will be using host names for controlling access to the card,
enter the Domain, as well as the DNS IP addresses in the
Nameserver fields.
6. If you will be using Simple Network Management Protocol (SNMP),
identify the physical location of the installed PDU/RPP/RPM/card
(sysLocation string) in the System location field. This value also
appears in the card's Web page header bar.
Enter the information to identify someone to contact with questions
about this device (sysContact string) in the System contact field. For
example, you can type a person's name, phone number,
department, e-mail address, or physical location.
7. You can also modify the card's IP address, the subnet mask, and
the gateway address for Port 1 and Port 2 (IP address, Netmask, and
Gateway fields).
8. To test the card's network connection, you can ping (request
acknowledgement from) a host. Enter an IP address or hostname in
the Ping test field and then click Test.
9. Click Apply to save the settings or Discard to cancel the changes.
10. Continue to Chapter 3, "Configuring the Card" on page 21 for
additional configuration options.
NOTE Once you have logged in as admin, it is important to completely exit the browser to
set the security level back to the standard read-only level. Click the Logon as User link from
the menu bar to force a logoff and re-login as user.
By default, the PXGX Series 1000 Card is configured to prevent
unauthorized SNMP and Modbus/TCP access by computers that are not
on the Trusted IPs/Hostnames list.
If you are using SNMP or Modbus/TCP, see "Restricting SNMP Access"
in Chapter 3, "Configuring the Card," to add specific IP addresses or
host names of trusted computers.
S
www.eaton.com/powerquality
164201670 Rev 4
GETTING STARTED
19