Pdubreaker; Eaton Emp Mib; Eaton Alarms+Traps Mib; Eaton Oid Assignments - Eaton Power Xpert 1000 Series User Manual

Eaton EMP MIB

Eaton Alarms+Traps MIB

Eaton OID Assignments

EATON Power Xpert
® Gateway Series 1000 Card User's Guide

pduBreaker

For each breaker in the system, there are subtables for:
S
Breaker Ratings. These objects provide the nominal rating values for
each breaker.
S
Breaker Meters. These objects provide energy accumulators for the
breaker, independent of phase.
S
Breaker Phase Meters. These objects provide meter readings for the
breaker, by phase (one, two, or three phases).
The Breaker tables are indexed by the panel number, breaker number,
and sometimes the phase. The breaker number corresponds to the first
physical panel position (or slot) it occupies. For example, a three- phase
breaker at positions 2, 4, and 6 would have a breaker number of 2.
Objects in this group are provided by the Powerware Environmental
Monitoring Probe (EMP) and include temperature and humidity readings,
alarming limits, the two contacts readings, and setup information. The
group contains a table of values for environmental contact sensing
(normally two digital inputs for monitoring all contacts).
Traps are sent in response to Powerware EMP changes to indicate the
type of alarm, alarm acknowledgement, and alarm clearing.
Objects in this group provide a table of active alarms and a count of
alarms currently active. The notification traps provided are triggered by
the publishing of an alarm or event.
These objects document all the object identifier assignments for Eaton
products.
S
www.eaton.com/powerquality
164201670 Rev 4
MIB FILES
53