Configuring E-Mail Notification - Eaton Power Xpert 1000 Series User Manual

CONFIGURING THE CARD

Configuring E-mail Notification

32 EATON Power Xpert
Use the PXGX Series 1000 Card to inform selected e-mail accounts of
events and changes in status as they occur in the PDU/RPP/RPM or to
provide a status message at a predetermined time.
To configure e-mail notification:
1. From the card's Web page, click the Email link from the menu bar.
2. Enter the IP address or host name of the SMTP Server IP/hostname
(mail server) that will be used to send the e-mail messages.
3. If you need to enter a user name and password for the SMTP
server, click Advanced SMTP settings....
If you have made changes to the E-mail page, click OK to save the
settings; otherwise, click Cancel. The Advanced SMTP
Configuration Settings page appears.
Enter the user name and password in the SMTP username and SMTP
password fields.
Specify a "from" e-mail address in the SMTP "From" Address field
(for example, PDU_1@10.222.10.111).
Click Apply to save the settings and return to the previous screen.
4. Specify events to trigger an e-mail to be sent to all recipients. Click
Configure to select the events.
Click OK to save the settings; otherwise, click Cancel. The Email
Event Trigger Configuration Settings page appears.
Select all, deselect all, or select specific event check boxes for
e-mail notification.
Click Apply to save the settings and return to the previous screen.
Test the event e-mail function by selecting Test Event Email. A
sample e-mail is sent for the first trigger event that is selected and
saved.
® Gateway Series 1000 Card User's Guide
S
www.eaton.com/powerquality
164201670 Rev 4