Dhcp - Draytek Vigor2760 Series User Manual

3. After finished the settings above, click Apply to save the settings then click Cancel to
return to previous page.
4 . 1 . 4 D H C P
4 . 1 . 4 D H C P
DHCP stands for Dynamic Host Configuration Protocol. DHCP allows a user to obtain an IP
address automatically from a DHCP server on the Internet.
The router by factory default acts a DHCP server for your network so it automatically dispatch
related IP settings to any local user configured as a DHCP client. It is highly recommended
that you leave the router enabled as a DHCP server if you do not have a DHCP server for your
network.
At least, one profile must be kept in this page. If you just want to have the default profile,
note that do not disable the default LAN_DHCP profile, otherwise, the system may not
run well.
Available parameters are listed below:
Item
Add
Edit
Delete
Refresh
Enable
Name
Interface
Vigor2760 Series User's Guide
Description
Create new DHCP profiles.
Edit the selected DHCP profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
Remove the selected DHCP profile.
Click it to refresh the web page.
Display the activation status for such interface.
Enable – The DHCP profile is activated.
Disable –The DHCP profile is not activated.
Display the profile name for DHCP.
Display the interface of such DHCP profile.
57