Draytek Vigor2760 Series User Manual page 92

In Bridge mode, the router will connect to up to four Vigor2760 which use the same mode,
and all wired Ethernet clients of every Vigor2760 will be connected together. You can use this
mode to connect a network to other networks which is physically isolated. Please note that
when you set to this mode, Vigor2760 will not accept regular wireless clients anymore.
In Repeater mode, the router will connect to up to four Vigor2760 which use the same mode,
and all wired Ethernet clients of every Vigor2760 will be connected together. You can use this
mode to connect a network to other networks which is physically isolated. When you use this
mode, this access point is still able to accept wireless clients.
Open Wireless LAN>>WDS to open the following page. It allows you to enable the WDS
setting, specify WDS mode (Bridge or Repeater) and modify the WDS settings.
Available parameters are listed below:
Item
Enable
Mode
WDS
Apply
Reset
Refresh
To edit a WDS profile, please do the following:
1. Move your mouse cursor on the WDS profile (from WDS1 to WDS4) you want to edit
and click on it. In this case, we choose WDS2.
Description
Check this box to enable WDS setting.
Choose the mode for WDS setting. Bridge mode is designed
to fulfill the first type of application. Repeater mode is for the
second one.
Name –Display the name of the WDS profile. Such name is
assigned by the router in default.
Enable –Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Peer MAC Address - Display the MAC address of the peer.
Click it to save the settings.
Click it to retrieve the default settings of this page.
Click it to clear current settings and return to the settings
saved previously.
84 Vigor2760 Series User's Guide