To add a static route profile, please do the following:
1.
Click Add.
2.
The following page appears.
Available parameters are listed below:
Item
Enable
Name
Destination IP
Address/Mask
Interface
Gateway
Apply
Clear
Cancel
Description
Check the box to enable such profile.
Type a name for such profile.
Type the IP address of the destination. All the packets into
such IP address will be forwarded to the gateway specified in
this page.
Choose an interface for the static route.
Type an IP address of the other router. All packets destined
to destination IP address/mask will be forwarded to the
gateway specified here.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
62
Vigor2760 Series User's Guide