Draytek Vigor2760 Series User Manual page 26

6. Type the router name and choose the protocol (PPP, Static IP or DHCP) according to the
information from your ISP. For example, you should select PPP mode if the ISP provides
you PPP interface. Then, click the Next button for next page.
Static IP: if you click Static IP, you will get the following page. Please type in the IP
address information and type the values for ADSL settings (it can be ignored if VDSL
service is offered) originally provided by your ISP. Then click Finish to complete the
configuration.
Available parameters are listed as follows:
Item
IP Address
Subnet Mask
Gateway
DNS Address
VPI
VCI
Description
Type the IP address.
Type the subnet mask.
Type the gateway IP address.
Type in the primary IP address for the router.
Stands for Virtual Path Identifier. It is an 8-bit header
inside each ATM cell that indicates where the cell should be
routed. The ATM, is a method of sending data in small
packets of fixed sizes. It is used for transferring data to client
computers.
Stands for Virtual Channel Identifier. It is a 16-bit field
inside ATM cell's header that indicates the cell's next
destination as it travels through the network. A virtual
channel is a logical connection between two end devices on
the network.
18 Vigor2760 Series User's Guide