Dhcp Table; Data Flow Monitor - Draytek Vigor2760 Series User Manual

MAC Address
Interface
4 . 1 2 . 3 D H C P T a b
4 . 1 2 . 3 D H C P T a b
The facility provides information on IP address assignments. This information is helpful in
diagnosing network problems, such as IP address conflicts, etc.
Each item will be explained as follows:
Item
Refresh
Expire Date/Time
MAC Address
IP Address
Host
4 . 1 2 . 4 D a t a F l o w
4 . 1 2 . 4 D a t a F l o w
This page displays the running procedure for the IP address monitored and refreshes the data
in an interval of several seconds. The IP address listed here is configured in Bandwidth
Management. You have to enable IP bandwidth limit and IP session limit before invoke Data
Flow Monitor. If not, a notification dialog box will appear to remind you enabling it.
Each item will be explained as follows:
Item
Block
Pass
Display the MAC address of the host.
Display interface to which packets for this route will be sent.
l e
l e
Description
Click it to refresh the web page.
It displays the leased time of the specified PC.
It displays the MAC address for the specified PC that DHCP
assigned IP address for it.
It displays the IP address assigned by this router for specified
PC.
It displays the host ID name of the specified PC.
M o n i t o r
M o n i t o r
Description
Prevent specified PC accessing into Internet within 5
minutes.
The device with the IP address is allowed to access into
208 Vigor2760 Series User's Guide