Draytek Vigor2760 Series User Manual page 62

Add
Edit
Delete
Reset
Refresh
Enable
Name
External Interface
Specific External IP
Address
Mapped IP Address
To add a NAT profile, please do the following:
1. Click Add.
Create new NAT profiles.
Edit the selected NAT profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
Remove the selected NAT profile.
Click it to rest to factory default settings.
Click it to refresh the web page.
Display the activation status for such interface.
Enable – The NAT profile is activated.
Disable –The NAT profile is not activated.
Display the profile name for NAT.
Display the WAN interface (for external connection) applied
by such virtual host profile.
Display the activation status of the function.
Enable – The function is activated.
Disable – The function is not activated.
Display the LAN IP address that the Destination IP will be
transferred to.
54 Vigor2760 Series User's Guide