Access Control - Draytek Vigor2760 Series User Manual

Apply
Refresh
4 . 2 . 4 A c c e s s
4 . 2 . 4 A c c e s s
In Access Control, the router may restrict wireless access to certain wireless clients only by
locking their MAC address into a black or white list. The user may block wireless clients by
inserting their MAC addresses into a black list, or only let them be able to connect by inserting
their MAC addresses into a white list.
In the Access Control web page, users may configure the Allow List/Deny List (white/black
list) modes used by each SSID and the MAC addresses applied to their lists.
Available parameters are listed below:
Item
Edit
Reset
Refresh
Name
Enable
Filter Type
To edit an Access Control profile, please do the following:
1. Choose the profile (from SSID1 to SSID4) you want and click the check box.
2. Click Edit to open the following page.
Vigor2760 Series User's Guide
C o n t r o l
C o n t r o l
to normal condition after two minutes. (You need to setup
WPS within two minutes)
Click it to save the settings.
Click it to fresh the web page.
Description
Edit the selected SSID profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
Click it to clear all of the setting profiles and return to
factory default setting,
Click it to refresh the web page.
Display the name of the Access Control profile. Such name
is assigned by the router in default.
Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Display the type (Deny List or Allow List) of the profile.
81