To add a filter rule profile, please do the following:
1.
Click Add.
2.
The following page appears.
Available parameters are listed below:
Item
(A) Filter Part
Enable
Name
Description
Source Interface /
Destination Interface
Enable – NAT is activated.
Disable –NAT is not activated.
Description
Check the box to enable the profile.
Type the name of the rule profile.
Enter filter set comments/description. Maximum length is 14-
character long.
Set the direction of packet flow. Use the drop down list to
choose the source interface and the destination interface.
94
(A)
Filter Part
(B)
Application
Part
Vigor2760 Series User's Guide