Static Route - Draytek Vigor2760 Series User Manual

4 . 1 . 5 . 2
4 . 1 . 5 . 2
When you have several subnets in your LAN, sometimes a more effective and quicker way for
connection is the Static route function rather than other method. You may simply set rules to
forward data from one specified subnet to another specified subnet without the presence of
RIP.
This page allows you to create several static routes to be selected for the route. Click
Network>>Static Route>>Static Route to get the following page:
Each item will be explained as follows:
Item
Add
Edit
Delete
Reset
Refresh
Enable
Name
Destination IP
Address/Mask
Interface
Gateway
Vigor2760 Series User's Guide
S t a t i c R o u t e
S t a t i c R o u t e
Description
Create new NAT profiles.
Edit the selected NAT profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
Remove the selected NAT profile.
Click it to rest to factory default settings.
Click it to refresh the web page.
Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Display the profile name for the static route.
Display the destination address/mask of the static route.
Display the interface that such static route uses.
Display the IP address receiving the packets from destination
IP address/mask.
61