Dos Defence - Draytek Vigor2760 Series User Manual

Available parameters are listed below:
Item
Action
Log
NAT
Apply
Clear
Reset
4 . 3 . 3 D o S D e f e n c
4 . 3 . 3 D o S D e f e n c
As a sub-functionality of IP Filter/Firewall, there are several types of detect/ defense function
in the DoS Defence setup. The DoS Defence functionality is disabled for default.
Each item will be explained as follows:
Item
Add
Edit
Delete
Reset
Refresh
Enable
Name
Interface
Description
Choose the action to be taken when packets match the default
rule.
Check the box to record related information on Syslog.
Check the box to enable the NAT function.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to retrieve the default settings of this page.
e
e
Description
Create a new rule profile.
Modify the selected rule profile.
You have to check the rule you want and then click this
button to open the edit window for modification.
Remove the selected rule.
You have to check the rule you want and then click this
button.
Click it to retrieve the default settings of this page.
Click it to fresh the web page.
Display the activation status of the rule.
Enable – The rule is activated.
Disable – The rule is not activated.
Display the name of the rule profile.
Display the interface used for such DoS defence profile.
98 Vigor2760 Series User's Guide