To add a new LAN to LAN profile, please do the following:
1.
Click the Add button.
2.
The following setting page will appear.
Available parameters are listed as follows:
Item
Enable
Name
Description
Idle Timeout
Call Direction
Dial-out
Description
Check the box to enable such profile.
Type the name of the profile.
Type a description for such profile.
The default value is 300 seconds. If the connection has been
idled over the value, the router will drop the connection.
Specify the allowed call direction of this LAN-to-LAN profile.
Both:-initiator/responder
Dial-Out- initiator only
Dial-In- responder only.
170
Vigor2760 Series User's Guide