Draytek Vigor2760 Series User Manual page 75

2. The following page appears.
Available parameters are listed below:
Item
Interface
Outbound QoS
Outbound
Bandwidth
Outbound Borrow
Bandwidth
Outbound QoS Class
Apply
Clear
Cancel
3. After finished the settings above, click Apply to save the settings.
Vigor2760 Series User's Guide
Description
Choose an interface for applying the QoS function.
Check the box to make the outgoing traffic following the
limitation specified in this page.
Type the transmission rate to limit the outgoing traffic.
Check this box to enable the bandwidth borrowed by other
clients.
When a client in LAN needs more bandwidth for data
transmission, the reserved bandwidth can be used
temporarily by the client in request if there is no other client
occupying the bandwidth.
Specify the value for Low, Normal, Medium and High. High
class means it owns the highest priority. Usually it will
occupy the most of the bandwidth ratio.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
67