Hardware Installation - Draytek Vigor2760 Series User Manual

1 . 3 H a r d w a r e
1 . 3 H a r d w a r e
Before starting to configure the router, you have to connect your devices correctly.
1. Connect the XDSL interface to the external XDSL splitter with an XDSL line cable for
all models. For Vigor2760Vn, also connect Line interface to external XDSL splitter.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This device
allows you to connect 4 PCs directly.
3. Connect Phone port to a conventional analog telephone (for V model only).
4. Connect detachable antennas to the router for Vigor2760 series (for n model only).
5. Connect one end of the power cord to the power port of this device. Connect the other
end to the wall outlet of electricity.
6. Power on the router.
7. Check the ACT and DSL, LAN LEDs to assure network connection.
(For the detailed information of LED status, please refer to section 1.2.)
I n s t a l l a t i o n
I n s t a l l a t i o n
8 Vigor2760 Series User's Guide