Draytek Vigor2760 Series User Manual page 104

Bandwidth Limit
(BW Limit)
Session Limit
Quality of Service
(QoS)
Web Content Filter
(WCF)
URL Content Filter
(UCF)
Application Filter
(APPF)
Apply
Clear
Cancel
3. After finished the settings above, click Apply to save the settings. A new filter rule
profile has been created.
Additional Information for User Management
When the box of User Management is checked, the router allows you to add more filter
settings. Refer to the following figure.
Click the button
Check this box to apply the bandwidth limit.
TX Bandwidth (KB/s) – Type a value for outgoing traffic.
RX Bandwidth (KB/s) – Type a value for incoming traffic.
The number typed here is the total sessions of the packets
that do not match the filter rule configured in this page. The
default setting is 30000.
Choose one of the QoS class to be applied as firewall rule.
High indicates highest bandwidth ratio.
For detailed information of setting QoS, please refer to the
related section later.
Select one of the Web Content Filter profile settings
(created in CSM>> Web Content Filter) for applying with
this router. Please set at least one profile for anti-virus in
CSM>> Web Content Filter web page first.
Select one of the URL Content Filter profile settings
(created in CSM>> URL Content Filter) for applying with
this router. Please set at least one profile for choosing in
CSM>> URL Content Filter web page first.
Select an APPF profile (created in CSM>> Application
Filter) for global IM/P2P application blocking. All the hosts
in LAN must follow the standard configured in the APPF
profile selected here.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
on the right side to open the following setting page.
96 Vigor2760 Series User's Guide