Draytek Vigor2760 Series User Manual page 117

Start/End Source
Port
Start/End
Destination Port
Application
Apply
Clear
Cancel
3. After finished the settings above, click Apply to save the file and wait for the following
dialog appears.
Vigor2760 Series User's Guide
Source Port and the Destination Port column are available
for TCP/UDP protocol. It can be ignored for other protocols.
Type the port values for both start source port and end
source port respectively.
Type the port values for both start destination port and end
destination port respectively.
Specify the type of the service object. It will influence the
effect of the firewall setting. For example, the URL Content
Filter and Web Content Filter will run only when HTTP is
selected in such field. If you choose None, then UCF and
WCF will not run normally.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
109