Draytek Vigor2760 Series User Manual page 63

2. The following page appears.
Available parameters are listed below:
Item
Enable
Name
External Interface
Specific External IP
Address
Mapped IP Address
Type
Vigor2760 Series User's Guide
Description
Check the box to enable such profile.
Type a name for such profile.
It is used to specify the WAN interface (for external
connection) for applying such virtual host profile.
The default setting is PVC1.
Check the box to specify a specific IP address for such
profile. It means when the destination IP matches with the
condition specified here, it will be transformed into the
Mapped IP Address.
If the box is not checked, it means any packet from any
destination IP via the external interface will be transformed
into Mapped IP Address.
External IP Address - Type the IP address of the LAN
interface.
Such LAN IP address is the one that the Destination IP will
be transferred to.
Note that the type you choose will result in different web
settings offered by this web page.
55