Draytek Vigor2760 Series User Manual page 27

Connection Type
PPP: if you click PPP as the protocol, please manually type the Username/Password and
type the values for ADSL settings (it can be ignored if VDSL service is offered) provided
by your ISP. Then click Finish to complete the configuration.
Available parameters are listed as follows:
Item
Username
Password
Confirm Password
VPI
VCI
Connection Type
Vigor2760 Series User's Guide
Select a connection mode for this WAN interface.
Description
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Type the password again for confirmation.
Stands for Virtual Path Identifier. It is an 8-bit header
inside each ATM cell that indicates where the cell should be
routed. The ATM, is a method of sending data in small
packets of fixed sizes. It is used for transferring data to client
computers.
Stands for Virtual Channel Identifier. It is a 16-bit field
inside ATM cell's header that indicates the cell's next
destination as it travels through the network. A virtual
channel is a logical connection between two end devices on
the network.
Select a connection mode for this WAN interface.
19