Draytek Vigor2760 Series User Manual page 48

2. The following setting page will appear.
Available parameters are listed below:
Item
Enable
Name
Description
Profile Type
ADSL_Mode
Protocol
Description
Check the box to enable such profile.
Type a name for such profile.
If required, type brief description for such profile.
Both – Choose it to configure the settings including ADSL
and VDSL.
ADSL – Choose it to configure the settings specified for
ADSL.
VDSL – Choose it to configure the settings specified for
VDSL.
Note that the type you choose will result in different web
settings offered by this web page.
This setting is available when Both/ADSL is chosen as
Profile Type.
VPI - Stands for Virtual Path Identifier. It is an 8-bit
header inside each ATM cell that indicates where the cell
should be routed. The ATM, is a method of sending data in
small packets of fixed sizes. It is used for transferring data to
client computers.
VCI - Stands for Virtual Channel Identifier. It is a 16-bit
field inside ATM cell's header that indicates the cell's next
destination as it travels through the network. A virtual
channel is a logical connection between two end devices on
the network.
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
The following protocols are available when Both is chosen
as Profile Type.
40 Vigor2760 Series User's Guide