Draytek Vigor2760 Series User Manual page 67

IP Range
Gateway
Lease Time (min)
DNS Server
IP DHCP Binding
Apply
Clear
Cancel
Vigor2760 Series User's Guide
profile for locating the DHCP server.
Server IP Address – Type the IP address of the DHCP
server.
Click the plus button to set an IP group with starting and
ending addresses which will be dispatched to the hosts in
LAN by DHCP server.
Start IP Address – Enter a value of the IP address for the
DHCP server to start with when issuing IP addresses.
End IP Address – Enter a value of the IP address for the
DHCP server to end with when issuing IP addresses.
Type the IP address of the DHCP server.
It allows you to set the leased time for the specified PC.
Choose Local or Custom as the DNS server for such DHCP
server profile.
Local - The system will use the IP address specify in
Network>>DNS as the DNS server for the clients within the
IP range. If not, simply choose Custom and define IP address
as the DNS server.
Custom –You can specify another DNS server IP address
(es) here if your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default primary DNS Server IP address.
This function is used to bind the IP and MAC address in
LAN to have a strengthening control in network. When this
function is enabled, all the assigned IP and MAC address
binding together cannot be changed. If you modified the
binding IP or MAC address, it might cause you not access
into the Internet.
When the client with the MAC address specified in this page
has the request of IP address from the DHCP server, the
bound IP of the MAC address will be assigned to that client.
MAC Address –Type the MAC address that is used to bind
with the assigned IP address.
IP Address –Type the IP address that will be used for the
specified MAC address.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
59