Draytek Vigor2760 Series User Manual page 93

2. The following page will appear immediately.
Available parameters are listed below:
Item
Name
Enable
Peer MAC Address
Security Setting
Key
Vigor2760 Series User's Guide
Description
Display the name of the WDS profile. Such name is assigned
by the router in default.
Check the box to enable the WDS profile.
If you choose Bridge as the connecting mode, please type in
the peer MAC address in these fields.
There are several types for security, OPEN, WEP and
WPA(TKIP) and WPA2(AES). The setting you choose here
will make the following WEP or WPA key field valid or not.
Choose one of the types for the router.
WEP – If you choose such type, you have to type the same
encryption key configured in Wireless LAN>>General
Setup.
WPA (TKIP) and WPA2(AES) - You can set the
encryption mode as WPA or WPA2 to establish your WDS
system between AP and the router. Type 8 ~ 63 ASCII
characters or 64 hexadecimal digits leading by "0x".
Such function is available when WEP/WPA is selected as
Security Setting.
The format of WEP Key is restricted to 5 ASCII characters
or 10 hexadecimal values in 64-bit encryption level, or
85