Exit/Duplex Switching Unit (Option - Minolta EP1080 Service Manual

23

EXIT/DUPLEX SWITCHING UNIT (OPTION)

If the copier is configured with an optional Sorter or Staple Sorter, or Duplex
Unit (installed in the Cabinet), the Exit/Duplex Switching Unit must be fitted
to the exit section of the copier.
Main Control Board PWB-A outputs a signal to energize Exit/Duplex
Switching Solenoid SL61, which switches the position of the Exit/Duplex
Switching Plate. The Unit has 2nd Paper Exit Sensor2 PC30 built into it
which detects a sheet of paper being fed out of the Unit. (For more details of
switching control, see the Service Manual for "PAPER FEED CABINET.")
2nd Paper Exit Sensor2 PC30
Paper Exit Roller/Rolls
Exit/Duplex Switching Solenoid SL61
Exit/Duplex Switching Plate
Drive Transmitting Gear
(coupled to a gear in the Exit
Section of the copier)
Exit/Duplex Switching Plate
M-78