Daewoo Nubira User Manual page 679

Daewoo nubira
Hide thumbs Also See for Nubira:
Table of Contents

Advertisement

Check for a noise in the fourth gear (4) only.
Check for a noise in the fifth gear (5) only.
Check for a noise in the reverse (R) gear only.
Check for a noise in all gears.
Check for the transaxle slipping out of gear.
Check for a leak in the area of the clutch.
Check for a leak at the center of the transaxle.
Check for a leak at the differential.
Check for a hard shift.
DAEWOO V–121 BL4
Checks
FIVE–SPEED MANUAL TRANSAXLE 5B – 7
S Replace any chipped, scored, or worn fourth gear or
output gear.
S Replace any worn third–fourth gear synchronizer.
S Replace any worn fourth–gear/bearing.
S Replace any worn differential–gear/bearing.
S Replace any worn–ring gear.
S Adjust, repair, or replace the shift lever and the rods.
S Replace any chipped, scored, or worn fifth gear or
output gear.
S Repair any worn fifth–gear synchronizer.
S Replace any worn fifth–gear/bearing.
S Replace any worn differential–gear/bearing.
S Replace any worn–ring gear.
S Adjust, repair, or replace the shift lever and the rods.
S Replace any chipped, scored, or worn reverse idler
gear, idler–gear bushing, input gear, or output gear.
S Replace any worn first–second gear synchronizer.
S Replace any worn output gear.
S Replace any worn differential–gear/bearing.
S Replace any worn–ring gear.
S Add sufficient lubricant.
S Replace any worn bearings.
S Replace any chipped, scored, or worn input–gear
shaft or output–gear shaft.
S Adjust or replace the linkage, as needed.
S Adjust, repair, or replace any binding shift linkage.
S Tighten or replace the input–gear bearing retainer, as
needed.
S Repair or replace any worn or bent shift fork.
S Repair the transaxle casing.
S Replace any damaged release bearing guide.
S Repair the transaxle casing.
S Repair the shift mechanism.
S Replace the damaged backup lamp switch.
S Adjust or replace the bearing retainers.
S Tighten or replace the differential cover.
S Adjust or replace the drive axle shaft seals.
S Replace any damaged release–bearing guide.
S Adjust, repair, or replace the shift mechanism.
S Adjust, repair, or replace the clutch–release system.
S Replace any chipped, scored, or worn fifth–gear syn-
chronizer.
S Replace any chipped, scored, or worn first–second
gear synchronizer.
S Replace any worn third–fourth gear synchronizer.
S Adjust, repair, or replace the shift lever and the rods.
Action

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents