Daewoo Nubira User Manual page 67

9P – 12IDOORS
3. Remove the rear door secondary weatherstrip.
Installation Procedure
1. Install the rear door secondary weatherstrip.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the exterior garnish molding with the screws.
Tighten
Tighten the rear door exterior garnish molding screws
to 1.5 NSm (13 lb–in).
3. Install the interior garnish molding.
DOOR LOCK STRIKER
Removal Procedure
1. Remove the screws and the door lock striker.
DAEWOO V–121 BL4