Daewoo Nubira User Manual page 422

Application
Connecting Rod Journal:
Diameter (All)
Out of Round (Maximum)
Rod Bearing Play
Cylinder Head:
Valve Stem Protrusion
Valve Guide Height
Overall Height
Minimum Overall Height After Machining
Valve System:
Valve Lash Compensators
Seat Runout (Maximum, All)
Face Runout (Maximum, All)
Valve Stem Diameter
Intake
Exhaust
Valve Diameter
Intake
Exhaust
Valve Seat Width
Intake
Exhaust
Valve Face Angle
Valve Guide Inside Diameter
Oil Pump:
Gear Lash
Outer Gear to Body
Outer Gear to Crescent
Inner Gear to Crescent
End Clearance
Sealants and Adhesives:
Rear Main Bearing Cap
Camshaft Carrier to Cylinder Head
Oil Pan Bolts
Oil Pump Bolts
Oil Pan Pickup Tube Bolts
Oil Gallery Plug
Coolant Jacket Caps and Plugs (Freeze Plugs)
Exhaust Manifold Studs/Nuts
DAEWOO V–121 BL4
DOHC ENGINE MECHANICAL 1C – 3
Description (Manual and Automatic)
48.981~ 48.987 mm (1.9283~1.9286 in.)
0.004 mm (0.00015 in.)
0.006~0.031 mm (0.00023~0.00122 in.)
39.2~39.8 mm (1.54~1.56 in.)
13.7–14.0 mm (0.54~0.57 in.)
134~0.025 mm (5.2755~0.0009 in.)
133.9 mm (5.27 in.)
Hydraulic
0.03 mm (0.00118 in.)
0.03 mm (0.00118 in.)
6.998~7.012 mm (0.2755~0.2760 in.)
6.078~6.992 mm (0.2747~0.2752 in.)
32µ0.1 mm (1.2598µ0.0039 in.)
29µ0.1 mm (1.1417µ0.0039 in.)
1.0~1.5 mm (0.039~0.059 in.)
1.7~2.2 mm (0.066~0.086 in.)
44³~40³
6.000~6.012 mm (0.236~0.237 in.)
0.10~0.20 mm (0.003~0.007 in.)
0.11~0.19 mm (0.004~0.007 in.)
0.40~0.50 mm (0.015~0.019 in.)
0.35~0.40 mm (0.013~0.015 in.)
0.030~0.10 mm (0.001~0.003 in.)
GE p/n RTV 159
HN 1581 (Loctite± 515)
HN 1256 (Loctite± 242)
HN 1256 (Loctite± 242)
HN 1256 (Loctite± 242)
HN 1256 (Loctite± 242)
HN 1756 (Loctite± 176)
Anti–seize Compound (HMC Spec HN1325)