Daewoo Nubira User Manual page 113

DAEWOO V–121 BL4
BODY FRONT END 9R – 7
2. Open the hood.
3. Remove the bolts and the hood latch release.
4. Remove the cable from the hood latch release as-
sembly.
5. Remove the cable and the grommet from inside the
vehicle.
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1. Install the cable through the engine compartment.
2. Install the cable into the hood latch release handle.
3. Install the grommet in the fire wall.