Daewoo Nubira User Manual page 441

1C – 22IDOHC ENGINE MECHANICAL
33. Connect the ignition wires to the spark plugs.
34. Install the spark plug cover.
35. Install the spark plug cover bolts.
Tighten
Tighten the spark plug cover bolts to 8 NSm (71 lb–in).
36. Connect the breather tube to the valve cover.
37. Align the timing marks on the camshaft gears to the
notches on the valve cover, using the intake gear
mark for the intake gear and the exhaust gear mark
for the exhaust gear.
38. Align the mark on the crankshaft gear with the
notch at the bottom of the rear timing belt cover.
39. Install the timing belt.
40. Check and adjust the timing belt tension. Refer to
"Timing Belt Check and Adjust" in this section.
DAEWOO V–121 BL4