Fuel Filter - Daewoo Nubira User Manual

Daewoo nubira
Hide thumbs Also See for Nubira:
Table of Contents

Advertisement

DAEWOO V–121 BL4
ENGINE CONTROLS 1F – 381
3.
Install the fuel pump access cover.
4.
Install the rear seat. Refer to Section 9H, Seats.
5.
Install the fuel pump fuse and the gas cap.
6.
Connect the negative battery cable.

FUEL FILTER

Removal Procedure
Disconnect the negative battery cable.
CAUTION : The fuel system is under pressure. To
avoid fuel spillage and the risk of personal injury or
fire, it is necessary to relieve the fuel system pressure
before disconnecting the fuel lines.
1.
Relieve the fuel system pressure. Refer to "Fuel
System Pressure Relief"in this section.
2.
Disconnect the inlet/outlet fuel lines by moving the
line connector lock forward and pulling the hose off
of the fuel filter tube.
3.
Remove the fuel filter mounting bracket assembly
bolt.
4.
Remove the fuel filter.
Installation Procedure
1.
Install the new fuel filter into the retaining clamp.
Note the flow direction.
2.
Install the outer fuel filter mounting bracket and the
mounting bracket assembly bolt.
Tighten
Tighten the fuel filter mounting bracket assembly bolt
to 89 lb–in (10 NSm).
3.
Connect the inlet/outlet lines. Secure the lines with
the connector lock.
4.
Connect the negative battery cable.
5.
Perform a leak test of the fuel filter.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents