Daewoo Nubira User Manual page 598

DAEWOO V–121 BL4
ENGINE CONTROLS 1F – 395
Installation Procedure
1. Install the G sensor and connect the electrical con–
nector.
2. Connect the negative battery cable.
EVAPORATIVE EMISSION CANISTER
Removal Procedure
CAUTION : Canister and vacuum hoses contain fuel
vapors. Do not smoke in the area or permit an open
flame.
1. Remove the Evaporative (EVAP) Emission canister
rotective cover.
2. Disconnect the canister fuel vapor hoses.
3. Remove the bolt that secures the canister flange to
the vehicle.
4. Slide canister out of the track holder.
5. Remove the canister.
Installation Procedure
1. Insert the canister into the track and slide it into
posi–tion.
2. Install the canister flange bolt.
Tighten
Tighten the evaporative emission canister flange bolt
to 20 NSm(15 lb–ft).
3. Connect the canister fuel vapor hoses.
4. Install the canister protective cover.
Tighten
Tighten the evaporative emission canister protective
cover to 71 lb–in (8 NSm).