DAEWOO V–121 BL4
DOHC ENGINE MECHANICAL 1C – 81
41. Mark the order of the connecting rod bearing caps.
42. Remove the connecting rod bearing cap bolts for all
of the pistons.
43. Remove the connecting rod bearing caps and the
lower connecting rod bearings.
44. Mark the order of the crankshaft bearing caps.
45. Remove the crankshaft bearing cap bolts.
46. Remove the crankshaft bearing caps and the lower
crankshaft bearings.
47. Remove the crankshaft.
48. Clean any necessary parts.
Assembly Procedure
1.
Coat the crankshaft bearings with engine oil.
2.
If replacing the crankshaft, transfer the pulse pick–
up sensor disc to the new crankshaft.