Fuel Tank Pressure Sensor - Daewoo Nubira User Manual

1F – 380IENGINE CONTROLS

FUEL TANK PRESSURE SENSOR

Removal Procedure
CAUTION : The fuel system is under pressure. To
avoid fuel spillage and risk of personal injury or fire,
it is necessary to relieve the fuel system pressure be-
fore disconnecting the fuel lines.
1. Relieve the fuel pressure. Refer to " Fuel System
Pressure Relief "in this section.
2. Disconnect the negative battery cable.
3. Remove the rear seat. Refer to Section 9H, Seats.
4. Remove the fuel pump access cover.
5. Disconnect the fuel tank pressure sensor electrical
connector.
6. Bend the retaining tabs and remove the fuel tank
pressure sensor.
Installation Procedure
1. Install the fuel tank pressure sensor and bend the
retaining tabs into place.
2. Connect the fuel tank pressure sensor electrical
connector.
DAEWOO V–121 BL4