Daewoo Nubira User Manual page 471

1C – 76IDOHC ENGINE MECHANICAL
20. Install the spark plugs.
Tighten
Tighten the spark plugs to 20 NSm (15 lb–ft).
21. Install the EI system ignition coil and EGR mount-
ing bracket.
22. Install the EI system ignition coil and EGR mount-
ing bracket bolts.
Tighten
Tighten the EI system ignition coil and EGR mounting
bracket bolts to 25 NSm (18 lb–ft).
23. Install the intake manifold studs.
24. Install the intake manifold gasket.
25. Install the intake manifold.
26. Install the intake manifold retaining nuts and retain-
ing bolt in the sequence shown.
Tighten
Tighten the intake manifold retaining nuts and retain-
ing bolt to 22 NSm (16 lb–ft).
27. Install the fuel rail assembly. Refer to Section 1F,
Engine Controls.
28. Install the thermostat housing assembly.
29. Install the thermostat housing mounting bolts.
Tighten
Tighten the thermostat housing mounting bolts to 15
NSm (11 lb–ft).
30. Install the coolant bypass housing and mounting
bolts.
Tighten
Tighten the coolant bypass housing and mounting
bolts to 15 NSm (11 lb–ft).
31. Install the camshaft position sensor.
Tighten
Tighten the camshaft position sensor bolts to 12 NSm
(106 lb–in).
DAEWOO V–121 BL4