DAEWOO V–121 BL4
PARKING BRAKE 4G – 9
7.
Route the parking brake cables through the access
holes to the parking brake/gearshift console.
8.
Install the rubber grommet for each cable.
9.
Install the rear wheels. Refer toSection 2E, Tires
and Wheels.
10. Lower the vehicle.
11. Attach the parking brake cable ends to the equaliz-
er.
12. Attach the eye bolt pull rod to the parking brake
lever assembly and fasten the split pin.
13. Install the parking brake/gearshift console hood.
Refer toSection 9G, Interior Trim.
14. If the parking brake shoe lever was pressed back-
ward before removing the brake drum, now press it
forward and adjust the parking brake. Refer
to"Parking Brake Adjustment"in this section.