1C – 12IDOHC ENGINE MECHANICAL
MAINTENANCE AND REPAIR
ON–VEHICLE SERVICE
VALVE COVER
Removal Procedure
1.
Disconnect the negative battery cable.
2.
Disconnect the breather tube from the valve cover.
3.
Disconnect the camshaft position sensor.
4.
Disconnect all of the necessary vacuum lines.
5.
Remove the spark plug cover bolts.
6.
Remove the spark plug cover.
7.
Disconnect the ignition wires from the spark plugs.
8.
Remove the valve cover bolts.
9.
Remove the valve cover washers.
10. Remove the valve cover.
11. Remove the valve cover gasket from the valve cov-
er.
DAEWOO V–121 BL4