Daewoo Nubira User Manual page 130

9S – 10IBODY REAR END
Installation Procedure
1. With the aid of another technician, install the hatch-
back door to the hinges with the bolts.
Tighten
Tighten the hatchback hinge bolts to 20 NSm (15 lbft).
2. Install the gas support assemblies to the hatchback
door. Refer to"Gas Support Assemblies (Hatch-
back)" in this section.
3. Connect the hatchback door electrical connectors,
washer hose, and grommets.
4. Close the hatchback door.
GAS SUPPORT ASSEMBLIES
(HATCHBACK)
Removal Procedure
1. Open and suitably support the hatchback door.
2. Unscrew and remove the gas support assembly
from the hatchback door and the body.
Installation Procedure
1. Install the gas support assembly onto the hatch-
back door and the body.
Tighten
Tighten the gas support assembly studs to 20 NSm
(15 lb–ft).
2. Close the hatchback door.
DAEWOO V–121 BL4