Daewoo Nubira User Manual page 481

1C – 86IDOHC ENGINE MECHANICAL
35. Install the rear timing belt cover.
36. Install the rear timing belt cover bolts.
Tighten
Tighten the rear timing belt cover bolts to 7 NSm (62
lb–in).
37. Install the crankshaft timing belt drive gear and the
bolt.
Tighten
Tighten the crankshaft timing belt drive gear bolt to
135 NSm (100 lb–ft) plus 30³ to 10³ using the torque
angular gauge KM–470–B.
38. Install the engine mount and the retaining bolts.
Tighten
Tighten the engine mount retaining bolts to 60 NSm
(44 lb–ft).
39. Install the timing belt automatic tensioner.
40. Install the timing belt automatic tensioner bolts.
Tighten
Tighten the timing belt automatic tensioner bolts to 25
NSm (18 lb–ft).
41. Install the timing belt idler pulley.
42. Install the timing belt idler pulley bolt and nut.
Tighten
Tighten the timing belt idler pulley bolt to 25 N·m (18
lb–ft).
Tighten
Tighten the timing belt idler pulley nut to 25 NSm (18
lb–ft).
Notice : Take extreme care to prevent any scratches,
nicks or damage to the camshafts.
43. Install the intake camshaft gear.
44. Install the intake camshaft gear bolt while holding
the intake camshaft firmly in place.
Tighten
Tighten the intake camshaft gear bolt to 50 NSm (37
lb–ft).
45. Install the exhaust camshaft gear.
46. Install the exhaust camshaft gear bolt while holding
the exhaust camshaft firmly in place.
Tighten
Tighten the exhaust camshaft gear bolt to 50 NSm (37
lb–ft). Using the angular torque gauge KM–470–B,
tighten the intake and the exhaust camshaft gear
bolts another 60 degrees plus 15 degrees.
DAEWOO V–121 BL4