Daewoo Nubira User Manual page 222

4E – 16IREAR DISC BRAKES
Assembly Procedure
CAUTION : Keep alcohol and brake fluid away from
the eyes, as serious injury may result.
CAUTION : Keep rubber seals and brake parts away
from oil. Oil can cause the seals to swell and deterio-
rate, and the braking system could become inopera-
tive.
Important : Do not use a hone or any other procedure to
remove material from the piston or caliper bore.
1. Clean all parts with denatured alcohol or brake
fluid. Dry the parts with unlubricated compressed
air, and blow out all passages in the caliper and the
bleeder valve.
2. Inspect the piston and the caliper for scoring and
corrosion. Replace any components that show
these conditions.
3. Insert the bleeder valve and the dust cover.
Tighten
Tighten the bleeder valve to 11 NSm (97 lb–in).
4. Lubricate a new piston inner seal with brake fluid.
5. Install the piston inner seal into the groove in the
cal–iper bore.
DAEWOO V–121 BL4