Daewoo Nubira User Manual page 270

5C0 – 24ICLUTCH
Assembly Procedure
1. Apply clean clutch fluid to the piston and the cup.
2. Install the spring to the piston, and insert the as-
sembly into the cylinder body.
3. Compress the piston with a driver, then install the
snap ring with snap ring pliers.
4. Install the pushrod and the boot.
5. Install the brackets and the bolts.
6. Install the clutch release cylinder assembly. Refer
to"Clutch Master Cylinder Assembl" in this section.
DAEWOO V–121 BL4