Esc/P-K Emulation Settings - Xerox DocuCentre-III C4100 Manual

Barcodes
In the ESC/P-K mode, you can use barcodes. The barcodes that can be used are as
follows.
JAN code
CODE39
CODABAR
Industrial 2 of 5
Matrix 2 of 5
Interleaved 2 of 5
Forms
You can use ESC/P-K to register forms on the machine. Up to 64 forms can be
registered.

ESC/P-K Emulation Settings

The following tables show the basic and extended settings that can be configured on
the ESC/P-K emulation mode menu.
Basic Settings
Item
Setting Item
Number
Output Color 5
Paper tray 3
Sets the output color.
[0] (Default) : Color
[1] : Monochrome
Sets the paper tray to be used for printing.
[0] : Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[5] : Tray 5 (Bypass)
[6] : Tray 6 (High Capacity Feeder)
If printing from Tray 5 (Bypass), instruct printing and then operate the
machine to start printing. To cancel the setting, change the setting for
"Tray 5 Confirmation".
Important •When Trays 1 to 3 is selected, the size of paper loaded in the tray
becomes the output paper size, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected, and if the paper of the same size is loaded
in the same orientation in multiple trays, paper will be supplied in the
order of Tray 1
loaded in multiple trays but in different orientations, the paper loaded
in the landscape orientation is given priority.
ESC/P-K Emulation
Value
Tray 2 Tray 3. If paper of the same size is
15
459