Xerox DocuCentre-III C4100 Manual page 23

1
Select [Screen Default], and select
[Change Settings].
2
Select [Send from Mailbox].
Note • Select [ ] to return to the
Setting the Screen to be displayed after Auto Clear
Set the screen to be displayed after Auto Clear. You can select from [Last Selection
Screen] and [All Services].
1
Select [Screen After Auto Clear],
and select [Change Settings].
2
Select [Last Selection Screen] or
[All Services].
Customizing the [All Services] Screen
By selecting features and their positions, you can customize the [All Services] screen
that is displayed when you press the <All Services> button on the control panel.
The following are the factory default features displayed on the [All Services] screen.
Note • Unsupported features will not be displayed on the screen. Abnormal features will be grayed
Copy
Fax/Internet Fax
E-mail
Scan to Mailbox
Network Scanning
Scan to PC
Send from Mailbox
Stored Programming
Job Flow Sheets
Language
Setup
Calibration
Activity Report
Fax Receiving Mode
Print Mode
1
Select [All Services], and select
[Change Settings].
2
Select [Language].
Note • Select [ ] to return to the
previous screen or [ ] to
move to the next screen.
out on the screen.
previous screen or [ ] to
move to the next screen.
Customizing the Control Panel
1
21