Xerox DocuCentre-III C4100 Manual page 269

• When you make an entry mistake, press the <C> (Clear) button and enter again.
• When moving to the next value without entering all 3 digits, select [Next].
[SMTP Server Port Number]
Enter a value in the range from 1 to 65535.
Note • Do not use the numbers assigned to the other ports.
• This configuration is not necessary if [SMTP] has been selected for [E-mail Receive
Protocol] and has already been configured.
[E-mail Send Authentication]
Select one from [Off], [POP before SMTP], or [SMTP AUTH].
Note • If [POP before SMTP] has been selected, the POP3 settings must be set.
[SMTP AUTH Login Name]
Set this item if [SMTP AUTH] has been selected for [E-mail Send Authentication].
[SMTP AUTH Password]
Set this item if [SMTP AUTH] has been selected for [E-mail Send Authentication].
Enter the same password twice in [New Password/Passcode] and [Retype
Password/Passcode]. If you do not set the password, leave it blank and select
[Save].
2) Select [Close].
5
Configure the Domain filter.
1) Select [Domain Filtering] and set the following items.
Domain filtering
Select one from [Off], [Allow Domains], or [Block Domains].
[Domain 1] - [Domain 50]
Specify up to 50 domains if either [Allow Domains] or [Block Domains] has been
selected for [Domain Filtering].
2) Select [Close] repeatedly until the [Tools] screen is displayed.
6
Set the S/MIME information.
1) Select [Security Settings].
2) Select [S/MIME Settings] and set the following items.
Device Certificate - S/MIME
Link a certificate to the machine.
For information on linking a certificate, refer to "Configuration of E-mail Encryption/Digital Signature"
(P.283).
S/MIME Communication
Set whether to enable or disable S/MIME Communication when a certificate ID is set.
Receive Untrusted E-mail
Set whether to receive untrusted e-mail or not.
Receive Untrusted Internet Fax
Set whether to receive untrusted Internet Fax or not.
Message Digest Algorithm
Select a message digest algorithm from [SHA1] or [MD5].
Installation Procedure
267
10