Copy Control - Xerox DocuCentre-III C4100 Manual

5 Tools
Bates Stamp - Number of Digits
Set the default value for [Number of Digits] displayed when [Bates Stamp] is selected for
[Annotation] on the [Output Format] tab.
Bates Stamp - Position
Set the default value for [Position] displayed when [Bates Stamp] is selected for [Annotation]
on the [Output Format] tab.
Bates Stamp - Font Size
Set the default value for [Font Size] displayed when [Bates Stamp] is selected for [Annotation]
on the [Output Format] tab.
Sample Job
Set the default value for [Sample Job] in the [Job Assembly] screen.
Booklet Creation - Cover Tray
Set the default value for [Covers Tray] in the [Booklet Creation] screen.
Covers - Cover Tray
Set the default value for [Main Body Tray] and [Cover Tray] in the [Covers] screen.
Build Job - Segment Separator Tray
5
Set the default value for [Separator Tray] in the [Transparency Options] screen.

Copy Control

These settings relate to copy operation control.
Memory Full Procedure
When the space of the hard disk runs out during scanning originals, a screen appears asking
how the partly stored data should be handled.
Once a certain time has elapsed with the confirmation screen displayed, the subsequent
processing is determined by these settings.
You can set the time until the memory full procedure is carried out. For more information, refer to "Auto
Job Release" (P.107).
Delete Job
The stored data is discarded.
Run Job
The read-in data is treated as valid, and the part of the original read in is copied.
Maximum Stored Pages
Set the maximum number of stored pages of a copy original. You can set a number from 1 to
999 pages.
Auto Paper Off
Select the tray used when [Auto] of [Paper Supply] in the [Copy] screen is cancelled (the tray
used when [Auto] of [Paper Supply] is selected in the [Copy] screen, and [Auto %] or
[Independent X-Y %] is selected for [Reduce/Enlarge]).
130