Cleaning The Film And Constant Velocity Transport Glass - Xerox DocuCentre-III C4100 Manual

1
Wipe the document cover with a
soft cloth moistened with water to
remove any dirt and then wipe it
with a soft, dry cloth.
Important • Do not use cleaning agents
Note • If dirt does not come off easily,
2
Wipe the document glass with a
soft cloth moistened with water to
remove any dirt, and then wipe it
with a soft, dry cloth.
Important • Do not use cleaning agents
Note • If dirt does not come off easily,

Cleaning the Film and Constant Velocity Transport Glass

Dirt or smudges on the film or constant velocity transport glass can cause streaks or
smears on outputs.
To ensure clean copies at all times, clean the machine about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
• Cleaning the machine with an excessive amount of water may cause the machine to
1
With a soft cloth moistened with
water, wipe the film, constant
velocity transport glass, and guide,
and then wipe off the excess water
with a soft dry cloth.
Important • Do not press the film with an
• Do not use cleaning agents
Note • If dirt does not come off easily, gently wipe it with a soft cloth moistened with a small amount
other than water or neutral
detergent.
gently wipe it with a soft cloth
moistened with a small
amount of neutral detergent.
other than water or neutral
detergent.
gently wipe it with a soft cloth
moistened with a small
amount of neutral detergent.
or coating on plastic parts.
malfunction or damage documents during copying.
excessive force as it can be
easily damaged.
other than water or neutral
detergent.
of neutral detergent.
Cleaning the Machine
63
3