Related Manuals for Xerox DocumentCentre C400 Series
Summary of Contents for Xerox DocumentCentre C400 Series
- Page 1 DocumentCentre C400/320/240 Series User Guide (PostScript ® Kit) ® This PDF file is best viewed using Acrobat Reader 5...
- Page 2 We welcome any comments on ambiguities, errors, omissions, or missing pages. Never attempt any procedure on the machine that is not specifically described in this guide. Unauthorized operation can cause faults or accidents. Fuji Xerox is not liable for any problems resulting from unauthorized operation of the equipment.
-
Page 3: Preface
Customer Support Center. Along with our efforts to make environmental values a part of the Fuji Xerox culture, DocumentCentre C400/320/240 adopts recycled components that satisfy our strict quality standards. -
Page 4: Table Of Contents
Contents x Preface ...........................i x Contents ..........................ii x Related Guides ........................iv x Using This Guide ........................v Chapter 1 Setting Up the PostScript Kit Checking the Contents ..................2 Safety Notes ......................3 Chapter 2 Operation With Windows 95, Windows 98, and Windows Me About the Software .................... - Page 5 Printer Driver Settings ................73 Installing the Screen Fonts .................. 77 Fuji Xerox PS Utility ..................... 79 5.5.1 Installing the Fuji Xerox PS Utility ............79 5.5.2 Uninstalling the Fuji Xerox PS Utility ............. 79 5.5.3 Using the Fuji Xerox PS Utility .............. 80 Appendix Cautions and Limitations ..................
-
Page 6: Related Guides
Related Guides This section describes the guides provided for this machine. Guides Supplied We provide the following guides for optimum usage of this machine. sUser Guide (Copier) This guide describes all the necessary steps for copying, clearing paper jams, daily care, setting the various items and safety information. sUser Guide (Printer/Scanner) This guide describes all the necessary steps for printing and scanning, setting the network environment, setting the various items, and troubleshooting. -
Page 7: Using This Guide
Using This Guide This section describes the organization of this guide. This guide has been produced for people who operate the DocumentCentre C400/320/240 Series of copiers on a regular daily basis. When reading this guide, read the chapter that is of particular relevance to the operation you are performing. -
Page 8: Operation On Macintosh Computers
This appendix describes cautions and limitations. Conventions In this guide, host device refers to a personal computer or workstation and “Doc- umentCentre C400/320/240” refers to “Fuji Xerox DocumentCentre C400/320/ 240”. The following icons are used in this guide. Indicates important information and must be read in detail. -
Page 9: Chapter 1 Setting Up The Postscript Kit
Setting Up the PostScript Kit Checking the Contents............... 2 Safety Notes..................3... -
Page 10: Checking The Contents
Checking the Contents The devices and components bundled with the present product are described below. If any of the following are missing, contact our Customer Support Center. PostScript Program ROM 1 PostScript Driver Library CD-ROM This ROM makes PostScript printing possible with the printer. -
Page 11: Safety Notes
Safety Notes Be sure to observe the following when handling the kit. Refer to the “Safety Notes” section of the User Guide (Copier) before you use the printer. Never open or remove machine covers that are secured with screws unless specifically instructed in the User Guide. - Page 13 Operation With Windows 95, Windows 98, and Windows Me About the Software ................6 2.1.1 Bundled Software ............... 6 2.1.2 Hardware/Software Requirements........6 Installing the AdobePS Printer Driver ..........7 2.2.1 Installation Procedure ............7 Printer Driver Properties ..............12 2.3.1 Configuration Tab Settings..........
-
Page 14: About The Software
About the Software This section describes the software bundled with the PostScript Driver Library CD-ROM for Windows 95, Windows 98, and Windows Me. 2.1.1 Bundled Software The following items are included in the “English\DC_C400 (or DC_C320 or DC_C240 depending on your printer model)\Win9x_Me” folder and “English\Utility\Win9x_Me” folder in the enclosed CD-ROM. -
Page 15: Installing The Adobeps Printer Driver
Installing the AdobePS Printer Driver Install AdobePS 4.5.3 printer driver onto Windows 95, Windows 98 or Windows Me by fol- lowing the procedure below. This section describes how to install the printer driver for Windows 98, as an example. It is possible to cancel installation of the printer driver by clicking Cancel in the dialog box displayed during instal- lation. - Page 16 2.2 Installing the AdobePS Printer Driver Select how the printer is connected to the computer and click Next. Select Local printer when the printer is connected directly to the com- puter. Otherwise, select Network printer. As an example, here is an explanation with a local printer.
- Page 17 2.2 Installing the AdobePS Printer Driver In the Install From Disk dialog box, enter “Drive Name:\English\DC_C400 (or DC_C320 or DC_C240 depending on your printer model)\win9x_Me” in the “Copy manufacturer’s files from:” box and click OK. In this guide, we have used “E:” as the CD-ROM drive. If you are using a different drive for the CD-ROM, specify accordingly.
- Page 18 2.2 Installing the AdobePS Printer Driver Type a name for the printer, specify whether you want to use the printer as the default printer, then click Next. Specify whether you want to print a test page, then click Finish. Installation begins. Read the End User License Agreement and click Agree.
- Page 19 2.2 Installing the AdobePS Printer Driver Confirm that a printer has been added in the Printers window. This completes installation of the printer driver. Remove the CD-ROM from the drive. See “2.3 Printer Driver Properties” (P. 12) to configure the printer. Store your CD-ROM in a safe place.
-
Page 20: Printer Driver Properties
Printer Driver Properties This section describes printer specific settings included in the printer driver properties. Configuration tab Options tab Output Settings tab Color Settings tab You can also refer to Help for explanations of these settings. See “2.4 How to Use Help” (P. 22) for details about how to use Help. - Page 21 2.3 Printer Driver Properties Settings Image Enhancement Specify whether to use the Image Enhancement function. Selecting On smoothes out boundaries when printing. This reduces jagged edges, thereby artificially increasing the resolution of the image. When printing an image (bitmap) composed of coarse halftone dots, smooth color gradation is impossible in certain situations.
- Page 22 2.3 Printer Driver Properties Job Offset Shifting the output positions of adjacent jobs (print command) or copies (sets) is called Job Offset. The positions of adjacent jobs or sets of copies are shifted to either sides of the output tray. Collated Select whether to collate a multiple-page file per set when they are printed.
- Page 23 2.3 Printer Driver Properties Specify Job Owner The following selections are available: Use Login Name Use your Windows Login Name as the Job Owner Name. The Job Owner Name becomes the “Login User Name\Host Name”. Enter Owner Name Select this if you want to specify a custom Job Owner Name, which is used for all the printer icons.
-
Page 24: Options Tab Settings
2.3 Printer Driver Properties 2.3.2 Options Tab Settings This section describes the settings in the Options tab. Select the settings that you want to make in Hardware Options and change them in the Change box below. To use this function, it is necessary to make appropriate settings in this tab. -
Page 25: Output Settings Tab Settings
2.3 Printer Driver Properties 2.3.3 Output Settings Tab Settings This section describes the settings in the Output Settings tab. You can restore defaults by clicking the Restore Defaults button. Output Paper Output Size Select the size of the paper used for output. The output is automatically enlarged or reduced, depending on the paper size selected here and the paper size selected in the Paper tab. - Page 26 2.3 Printer Driver Properties Job Type Job Type You can specify the print function from among Secure Print, Sample Print, and Delayed Print. Secure Print is a function that temporarily stores print jobs in the printer, and then prints them when print instructions are received from the printer control panel. Sample Print is a function that outputs only one copy when multiple copies are specified.
- Page 27 2.3 Printer Driver Properties Document Name When “Enter Document Name” is selected in the Retrieve Document Name list, you can specify a document name with a maximum of 24 alphanumeric characters. Start Print Time Set the time that you want Delayed Print to be carried out. Place the cursor in the hour or minute box and press the up or down triangle to specify the starting.
-
Page 28: Color Settings Tab Settings
2.3 Printer Driver Properties 2.3.4 Color Settings Tab Settings This section describes the settings in the Color Settings tab. You can restore defaults by clicking the Restore Defaults button. Settings Output Color Specify whether to print in color or black. Print Mode Specify whether to give priority to the print speed or the image quality. - Page 29 2.3 Printer Driver Properties RGB Color Correction Specify the coloration of the RGB Color Correction. Normal This settings is optimized for printing documents that contain text and graphs, such as a business documents. Photo This setting is optimized for printing photos or images with gradations. Select this setting when printing images in RGB.
-
Page 30: How To Use Help
How to Use Help This section describes how to use Help. Procedure You can see in the upper right, or the Help button in the lower right of the printer driver properties dialog box. Click and a “?” mark appears next to the pointer. You can then click items for which you need explanations, opening a pop-up window that contains relevant information. - Page 31 Operation With Windows NT 4.0 About the Software ................24 3.1.1 Bundled Software ............. 24 3.1.2 Hardware/Software Requirements........24 Installing the AdobePS Printer Driver ..........25 3.2.1 Installation Procedure ............25 Device Options and Print Settings ........... 30 3.3.1 Device Settings Tab Settings ..........30 3.3.2 Configuration Tab Settings..........
-
Page 32: About The Software
About the Software This section describes the software for Windows NT 4.0 bundled with the PostScript Driver Library CD-ROM. 3.1.1 Bundled Software The following items are included in the “English\DC_C400 (or DC_C320 depending on your printer model)\NT40” folder and “English\Utility\NT40” folder on the CD-ROM. Also, be sure to read Readme.txt containing cautionary notes about how to use the printer driver. -
Page 33: Installing The Adobeps Printer Driver
Installing the AdobePS Printer Driver Install the AdobePS 5.2.2 printer driver onto Windows NT by following the procedure below. It is possible to cancel installation of the printer driver by clicking Cancel in the dialog box displayed during instal- lation. You can also click Back to delete the settings in that dialog box and return to the previous dialog box. 3.2.1 Installation Procedure Procedure... - Page 34 3.2 Installing the AdobePS Printer Driver Select the port you are using and click Next. Insert the PostScript Driver Library CD-ROM in the CD-ROM drive. Click Have Disk. Enter “Drive Name:\English\DC_C400 (or DC_C320 or DC_C240, depending on your printer model)\NT40” in the “Copy manufacturer’s files from:”...
- Page 35 3.2 Installing the AdobePS Printer Driver Select your printer model from the Printers list and click Next. Enter a printer name, specify if you want to use the printer as the default printer, then click Next. Select Not shared and click Next. We recommend that you install the driver on each computer with the procedure appropriate to the OS.
- Page 36 3.2 Installing the AdobePS Printer Driver Specify whether you want to print a test page, then click Finish. Installation begins. Read the End User License Agreement and click Agree. When you click the Disagree button, see “ If you click Disagree in the End User License Agree- ment”...
- Page 37 3.2 Installing the AdobePS Printer Driver If you click Disagree in the End User License Agreement When you click the Disagree button in the End User License Agreement, the following dialog box appears. Click the No button to return to 13 and continue the operation. Click the Yes button to cancel the installation.
-
Page 38: Device Options And Print Settings
Device Options and Print Settings This section describes printer specific settings in the settings in the printer driver properties and document presets. Installable Options in the Device Settings tab Configuration tab Printer Specific Sections in the Device Settings of the Advanced tab Output Settings tab You can also refer to Help for explanations of these settings. - Page 39 3.3 Device Options and Print Settings Settings Output Tray Specify whether Finisher is installed. Side Output Tray Specify whether an optional side tray kit is installed. Paper Detect by Tray Specify whether the Paper Size Detection by Tray function should automatically detect B4 or 8K paper size.
-
Page 40: Configuration Tab Settings
3.3 Device Options and Print Settings 3.3.2 Configuration Tab Settings This section describes the settings of the Configuration tab. You can restore defaults by clicking the Restore Defaults button. Specify Job Owner The following selections are available: Use Login Name Use your Windows Login Name as the Job Owner Name. - Page 41 3.3 Device Options and Print Settings Job Owner Name You can enter up to 31 alphanumeric characters for the Job Owner Name for User. If you enter more than 31 characters, only the first 31 characters are used. The default setting is “UnknownUser”. Password Enter the password for the Job Owner Name.
-
Page 42: Advanced Tab Settings
3.3 Device Options and Print Settings 3.3.3 Advanced Tab Settings This section describes the settings of Printer Features in the Advanced tab. Select the items in Printer Features under Document Options of the Advanced tab and change the settings in the Change Setting box at the bottom of the tab. The settings that can be selected vary depending on which options have been installed. - Page 43 3.3 Device Options and Print Settings Transparency Separators Specify whether to use transparency separators and the source of the separators, if selected. Select Auto for the paper source to automatically feed from the paper tray with paper of the same size and in the same orientation as transparencies. When using Transparency Separators, be sure to load paper of the same size and in the same orientation as transparencies into the paper tray.
- Page 44 3.3 Device Options and Print Settings Image Enhancement Specify whether to use the Image Enhancement function. Selecting On smoothes out boundaries when printing. This reduces jagged edges, thereby artificially increasing the resolution of the image. When printing an image (bitmap) composed of coarse halftone dots, smooth color gradation is impossible in certain situations.
-
Page 45: Output Settings Tab Settings
3.3 Device Options and Print Settings 3.3.4 Output Settings Tab Settings This section describes the settings in the Output Settings tab. You can restore defaults by clicking the Restore Defaults button. Job Type You can specify the print function from among Secure Print, Sample Print, and Delayed Print. - Page 46 3.3 Device Options and Print Settings Delayed Print Select when you want to output delayed prints. See the On-line Help for details on the operation of the printer. User ID Displays the User ID for Job Type. The user ID displayed is the User ID specified on the Configuration tab.
-
Page 47: How To Use Help
How to Use Help This section describes how to use Help. Procedure The Help button ( in the figure below) appears on the upper right of the printer driver properties dialog box. Click and a “?” mark appears next to the pointer.You can then click items for which you need explanations, opening a pop-up window that contains relevant information. - Page 49 Operation With Windows 2000 and Windows XP About the Software ................42 4.1.1 Bundled Software ............. 42 4.1.2 Hardware/Software Requirements........42 Installing the Printer Driver............... 43 4.2.1 Installation Procedure ............43 Device Options and Print Settings ........... 49 4.3.1 Device Settings Tab Settings ..........49 4.3.2 Configuration Tab Settings..........
-
Page 50: About The Software
About the Software This section describes the software bundled with the PostScript Driver Library CD-ROM for Windows 2000 and Windows XP. 4.1.1 Bundled Software The following items included in the enclosed CD-ROM are necessary to use the printer on Windows 2000 and Windows XP. Also, be sure to read Readme.txt containing cautionary notes about how to use the printer driver. -
Page 51: Installing The Printer Driver
Installing the Printer Driver Install MS PScript 5 printer driver onto Windows 2000 and Windows XP by following the pro- cedure below. This section describes how to install the printer driver for Windows 2000, as an example. It is possible to cancel installation of the printer driver by clicking Cancel in the dialog box displayed during installation. - Page 52 4.2 Installing the Printer Driver Select how the printer is connect to the computer and click Next. Select Local printer if the printer is connected directly to the computer or to the network in the TCP/IP(LPD) environment. Otherwise, select Network printer. As an example, here is an explanation with Local printer.
- Page 53 4.2 Installing the Printer Driver (3) Click Next. (4) Enter the IP address of the printer in Printer Name or IP Address, then click Next. Click Finish in the dialog box that will be displayed. Insert the PostScript Driver Library CD-ROM in the CD-ROM drive. Click Have Disk.
- Page 54 4.2 Installing the Printer Driver Enter “Drive Name:\English\DC_C400 (or DC_C320 or DC_C240 depending on your printer model)\win2000” in the “Copy manufacturer’s files from:” box and click OK. In this guide, we have used “E:” as the CD-ROM drive. If you are using a different drive for the CD-ROM, specify accordingly.
- Page 55 4.2 Installing the Printer Driver Select Do not share this printer and click Next. We recommend that you install the driver on each computer with the procedure appropriate to the OS. Specify whether or not to print a test page, then click Next. Click Finish.
- Page 56 4.2 Installing the Printer Driver Confirm that the printer has been added in the Printers window. This completes the installation of the printer driver. Remove the CD-ROM from the drive. See “4.3 Device Options and Print Settings” (P. 49) to set up the printer. Store your CD-ROM in a safe place.
-
Page 57: Device Options And Print Settings
Device Options and Print Settings This section describes the settings specific to the printer, which are among the settings to be made using the printer driver properties. For other items, refer to the Help. Installable Options in the Device Settings tab Configuration tab Sections Specific to the Printer in Printer Features of the Advanced Options dialog box Output Settings tab... -
Page 58: Configuration Tab Settings
4.3 Device Options and Print Settings Settings Output Tray Specify whether Finisher is installed and its type. Side Output Tray Specify whether an optional side tray kit is installed. Paper Detect by Tray Specify whether the Paper Size Detection by Tray function should automatically detect B4 or 8K paper size. -
Page 59: Specify Job Owner
4.3 Device Options and Print Settings Specify Job Owner The following selections are available: Use Login Name Use your Windows Login Name as the Job Owner Name. The Job Owner Name becomes the “Login User Name\Host Name”. You can enter up to 31 alphanumeric characters for the login name. -
Page 60: Advanced Options Dialog Box Settings
4.3 Device Options and Print Settings 4.3.3 Advanced Options Dialog Box Settings This section describes the settings of the Advanced Options dialog box displayed when clicking Advanced in the Layout tab. Select the items from Printer Features and change them on the menu displayed to the right. - Page 61 4.3 Device Options and Print Settings Transparency Separators Specify whether to use transparency separators and the source of the separators, if selected. Select Auto for the paper source to automatically feed from the paper tray with paper of the same size and in the same orientation as transparencies. When using Transparency Separators, be sure to load paper of the same size and in the same orientation as transparencies into the paper tray.
-
Page 62: Output Settings Tab Settings
4.3 Device Options and Print Settings Substitute Tray Specify what action to take when the paper for the print size is not loaded in the machine. Use Printer Settings Use the printer setting. The settings can be confirmed on the printer control panel. Display Message Display paper supply messages on the printer control panel. - Page 63 4.3 Device Options and Print Settings Job Type You can specify the print function from among Secure Print, Sample Print, and Delayed Print. Secure Print is a function that temporarily stores print jobs in the printer, and then prints them when print instructions are received from the printer control panel. Sample Print is a function that outputs only one copy when multiple copies are specified.
-
Page 64: Color Settings Tab Settings
4.3 Device Options and Print Settings Document Name When “Enter Document Name” is selected in the Retrieve Document Name list, you can specify a document name up to 24 alphanumeric characters. Start Print Time Set the time that you want Delayed Print to be carried out. Place the cursor in the hour or minute box and press the up or down triangle to specify the starting. - Page 65 4.3 Device Options and Print Settings Settings Output Color Specify whether to print in color or black. Print Mode Specify whether to give priority to the print speed or the image quality. RGB Color Correction Specify the coloration of the RGB Color Correction. Normal ...
-
Page 66: How To Use Help
How to Use Help This section describes how to use Help. Procedure The Help button, as shown below, appears on the upper right of the printer driver properties dialog box. Click and a “?” mark appears next to the pointer. You can then click items for which you need explanations, opening a pop-up window that contains relevant information. - Page 67 Printer Driver Settings ............73 Installing the Screen Fonts............... 77 Fuji Xerox PS Utility ................. 79 5.5.1 Installing the Fuji Xerox PS Utility........79 5.5.2 Uninstalling the Fuji Xerox PS Utility ........ 79 5.5.3 Using the Fuji Xerox PS Utility.......... 80...
-
Page 68: About The Software
AdobePS Printer Driver (ver. 8.5.1, 8.7, and 8.8) and PPD files Adobe PostScript driver and PPD files (for Macintosh). Fuji Xerox PS Utility Enables you to define your printer settings. Adobe Screen Fonts Contains 117 PostScript fonts and 19 TrueType fonts, which are standard for PostScript 3 printers. -
Page 69: Hardware/Software Requirements
5.1 About the Software 5.1.2 Hardware/Software Requirements The minimum system requirements for the Macintosh printer driver and the utility are described below. Computer System For AdobePS 8.5.1: Mac OS 7.1 or later For AdobePS 8.7: Mac OS 8.5 and 8.5.1 For AdobePS 8.8: Mac OS 8.6 through 9.2.2 4 Mbyte or more of available RAM (32 Mbyte recommended) -
Page 70: Installing The Adobeps Printer Driver
Installing the AdobePS Printer Driver This section describes how to install the Adobe printer driver and how to set the printer driver for this machine. There are two steps to install the printer driver. Firstly, use the installer enclosed in the CD-ROM to install the printer to the Macintosh. Then, configure the printer driver according to the printer used. - Page 71 5.2 Installing the AdobePS Printer Driver Read through the license agreement carefully and if you have no objec- tions to it, click Accept. Read the Read Me displayed, then click the Continue button. Confirm the Install Location and change it if necessary, then click Install.
-
Page 72: Setting The Printer Driver (Mac Os 9.X Or Earlier)
5.2 Installing the AdobePS Printer Driver 5.2.2 Setting the Printer Driver (Mac OS 9.x or earlier) When you finish installing the AdobePS printer driver, set the PostScript Printer Description (PPD) file for this machine to the printer driver. The printer driver controls the functions of this machine based on the information in the PPD file. - Page 73 5.2 Installing the AdobePS Printer Driver (1) Click Select PPD. (2) Select your printer model in the list, then click Select. The PPD file for this machine is set. Click Configure to set the options. See “5.3 Options” (P. 71) for details about the options. You can change the print settings after you install the printer driver.
-
Page 74: Installation Procedure (Mac Os X)
The FXOPS-PS window opens. Open the Mac OS X folder. The Mac OS X window opens. Double-click Fuji Xerox PPD Installer. The installer starts and the Authenticate window opens. Enter the Administrator’s user name and password, then click OK. The License screen opens. - Page 75 5.2 Installing the AdobePS Printer Driver Read through the license agreement carefully and if you have no objec- tions to it, click Accept. Confirm the Install Location and change it if necessary, then click Install. Click Quit. This completes the installation. Proceed to “5.2.4 Adding a Printer (Mac OS X)”...
-
Page 76: Adding A Printer (Mac Os X)
5.2 Installing the AdobePS Printer Driver 5.2.4 Adding a Printer (Mac OS X) After the PPD file has been installed, set the PPD file for the printer driver, and then add the printer. The printer driver controls the printer functions based on the information in the PPD file. - Page 77 5.2 Installing the AdobePS Printer Driver Select the protocol used to connect the printer. sWhen using Apple Talk Select Apple Talk from the menu, and specify the zone for the printer being used. Select the printer you are using from the list. Select Auto Select from Printer Model.
- Page 78 5.2 Installing the AdobePS Printer Driver Regarding printer options Click Printers on the Print Center menu bar, and select Show Info. Next, select Installable Options, and select the options that have been installed to the printer. “5.3 Options” for details about the options.
-
Page 79: Options
Options This section describes the printer options and the printer driver settings. 5.3.1 Printer Specific Options Settings For Mac OS 9.x and earlier This section describes Installable Options for operating systems earlier than Mac OS 9.x. Normally, Installable Options are automatically set according to the bi-directional communications with this machine. - Page 80 5.3 Options For Mac OS X This section describes Installable Options for Mac OS X. Procedure Click Printers on the Print Center menu bar, and select Show Info. Select Installable Options, and select the options that have been installed on the printer. Settings This section describes the items to set in Installable Options.
-
Page 81: Printer Driver Settings
5.3 Options 5.3.2 Printer Driver Settings This section describes the printer driver settings. Procedure On the File menu of the application, click Print. The Print dialog box appears. Select Printer Specific Options. If your operating system is Mac OS X, select Printer Features. Specify the functions that you want to set. - Page 82 5.3 Options Output Destination Set the destination for output. The items that can be selected vary according to whether the optional Side Output Tray or Finisher has been installed. Job Offset Shifting the output positions of adjacent jobs (print command) or copies (sets) is called Job Offset.
- Page 83 5.3 Options RGB Color Correction Specify the coloration of the RGB Color Correction. Normal This settings is optimized for printing documents that contain text and graphs, such as a business documents. Photo This setting is optimized for printing photos or images with gradations. Select this setting when printing images in RGB.
- Page 84 5.3 Options Substitute Tray Specify what action to take when the paper for the print size is not loaded in the machine. Use Printer Settings Use the printer setting. The settings can be confirmed on the printer control panel. Display Message Display paper supply messages on the printer control panel.
-
Page 85: Installing The Screen Fonts
Installing the Screen Fonts This section describes how to install the fonts in the Screen Font folder. It is recommended to close all other applications before installing the fonts. Otherwise, a warning message appears between steps 5 and 6 Procedure Start Macintosh and insert the PostScript Driver Library CD-ROM into the CD-ROM drive. - Page 86 5.4 Installing the Screen Fonts You may select Easy Install or Custom Install. Easy Install installs all the fonts provided in the Screen Font folder. Custom Install installs the selected fonts only. Simply click on the triangle arrow beside the four cate- gories of fonts to display the fonts in each category and then check the fonts to be installed.
-
Page 87: Fuji Xerox Ps Utility
Fuji Xerox PS Utility. When using the Fuji Xerox PS Utility, set the printer’s EtherTalk port status to Enable and make sure that the printer is set correctly in the Chooser. See the User Guide (Printer/Scanner) for details on setting the port. -
Page 88: Using The Fuji Xerox Ps Utility
Fuji Xerox PS Utility. This section describes how to activate and use the Fuji Xerox PS Utility. You need to install the Fuji Xerox PS Utility. See “5.5.1 Installing the Fuji Xerox PS Utility” (P. 79) for details about how to install the Fuji Xerox PS Utility. - Page 89 Open button. You may select whether to display the result on the screen or save it to file. You may download the PS file even when the Connect Printer button on the Fuji Xerox PS Utility win- dow is not clicked.
- Page 90 Settings menu. You may change the printer name in this window. You may change the printer name even when the Connect Printer button on the Fuji Xerox PS Utility window is not clicked. In order to do so, you have to make sure that the printer name you want to change is selected in the Chooser first, before you activate the Fuji Xerox PS Utility.
-
Page 91: Appendix
Appendix Cautions and Limitations..............84... -
Page 92: Cautions And Limitations
Cautions and Limitations About the driver Cautions and limitations relating to each type of driver are listed Readme.txt in the PostScript Driver Library CD-ROM. Be sure to read it before installing the driver. Installing this PostScript kit You must install the 64MB SDRAM kit to use this PostScript kit. Troubleshooting See the User Guide (Printer/Scanner) for error codes and error messages displayed on the printer control panel. -
Page 93: Index
Windows XP ....................Download PS file ..........Error codes ............Error messages ............ EtherTalk ............... Fuji Xerox PS Utility ........Options tab ............Output settings tab ........PostScript Driver Library ........PostScript Logo Seal ..........PostScript Program ROM ........ - Page 95 After completing this form, detach and send it to the address below. (Please use your own envelope and postage stamp.) Thank you for your cooperation. ✂ Fuji Xerox Co., Ltd. KSP R&D 2D7 3-2-1, Sakado, Takatsu-ku Kawasaki-shi, Kanagawa-ken JAPAN 213-0012.
- Page 97 ® User Guide (PostScript Kit) ME3134E2-1 (Edition 2) Human Interface Design Development July 2003 Document Products & Supply Company © Fuji Xerox Co., Ltd. Copyright 2003 by Fuji Xerox Co., Ltd.