Xerox DocuCentre-III C4100 Manual page 474

15 Appendix
Setting Item
Layout
Paper Size
Output Color
Print Processing
Mode
15
472
Item
Number
405 Sets the layout for printing.
Note • This item can be set when [PDF Bridge] is selected for [Print
Processing Mode].
[0] (Default)
[1]
[2]
[3]
[4]
The [Auto %] setting automatically calculates the largest magnification
possible to fit to the output paper size. It automatically selects A4 or letter
size paper based on the size of the original PDF file.
The [Booklet] setting prints the images side by side, on both sides of each
page, in the correct order to make a booklet. Some documents may not
be printed in a booklet fashion depending on the structure of their pages.
In such case, they will be printed with the [Auto %] setting.
Note • When [A4] is selected for [Paper Size], documents will be printed on
A4 size paper.
• When [Paper Size] is set to [Auto], documents will be printed on A3
or A4 size paper.
The 2-up setting prints two pages onto one sheet of paper. When 2 Up is
selected, the paper size is fixed at A4.
The 4-up setting prints four pages on each sheet of paper. When 4 Up is
selected, the paper size is fixed at A4.
406 Set the size of the paper to be printed.
[0] (Default)
[1]
The [Auto] setting automatically determines the paper size, based on the
size of a PDF file to be printed and the settings configured for it.
407 Set whether to print in color or monochrome.
[0] (Default)
[1]
The [Auto] setting automatically determines the output color; color or
monochrome. If colors other than black and white are used on the
original, the machine prints in color, and if only black and white are used
on the original, the machine prints in monochrome.
408 Sets the print processing mode when using the PDF Direct Print feature.
[0] (Default)
[1]
[PDF Bridge] processes PDF files using the PDF Direct Print feature
provided by Fuji Xerox.
[PS] processes PDF files using the PostScript feature provided by Adobe.
This item appears only when the optional Adobe PostScript 3
Note •
kit is installed.
• The print results may be different between the [PDF Bridge] and [PS]
selections.
• When [PS] is selected, the [Layout] setting becomes invalid.
Value
: Auto %
: Booklet
: 2-up
: 4-up
: 100% (size-by-size)
: Auto
: A4
: Auto
: Black
: PDF Bridge
: PS