Executing Calibration - Xerox DocuCentre-III C4100 Manual

Executing Calibration

The machine automatically adjusts calibration when the density or color reproducibility
in copies and prints has deteriorated. Calibration can be adjusted for each screen type.
The machine offers the following three screen types:
Copy Job
Adjusts the gradation for [Text], [Photo & Text], or [Maps] of [Original Type].
Print Job 1
Basic screen for printing.
For PCL printer drivers
- Adjusts the gradation for items other than [CAD] and [Presentation] of [Image
Types] in the [Image Options] tab.
For PostScript printers
- Adjusts the gradation when [High Quality] or [High Speed] of [Image Quality] and
[Auto Screening], [Fineness], or [Standard] of [Screen] in the [Image Options] tab
is selected.
- Adjusts the gradation when [High Speed] of [Image Quality] and [Fineness] or
[Standard] of [Screen] in the [Image Options] tab is selected.
Print Job 2
For PCL printer drivers
- Adjusts the gradation for [Presentation] at [Image Types] in the [Image Options]
tab.
For PostScript printers
- Adjusts the gradation when [High Speed] of [Image Quality] and [Auto Screening]
or [Gradation] of [Screen] in the [Image Options] tab is selected.
Important • Because the calibration uses the Tray 5 (Bypass), load plain paper in the Tray 5 (Bypass).
Note • It is recommended that you perform adjustments for all the screen types. After one screen
• If color gradation is not compensated despite the periodic execution of calibration, contact
• The calibration does not execute when [Text] or [Map] is selected for [Original Type] in the
1
Press the <Log In/Out> button.
Note • Calibration can also be
Any other types of paper are not available. For more information, refer to "Paper Tray
Attributes" (P.111).
type is adjusted, specify another screen type and repeat the adjustment procedure.
our Customer Support Center.
[Image Quality] tab for copying. Before performing calibration, make sure that [Copy
Defaults] in the System Administration mode is set as follows: Lighten/Darken: Normal,
Color Shift: Normal, Saturation: Normal, Color Balance: 0. After finishing the calibration,
change the settings of [Copy Defaults] if necessary. For information about the [Copy
Defaults], refer to "Copy Defaults" (P.126).
performed through the menu
screen. Clicking [Calibration]
on the menu screen displays
the screen shown in step 9.

Executing Calibration

1 2 3
4 5 6
7 8 9
0 #
C
3
<Log In/Out>
button
65