Xerox DocuCentre-III C4100 Manual page 375

Category
Error Code
C P F S M O
016-704
016-705
O
016-706
O
016-707
O
016-708
O
016-710
O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
O [Cause] The mailbox is full, and hard disk capacity is insufficient.
[Remedy] Remove unnecessary documents from the mailbox, and
save the document.
Refer to "6 Send from Mailbox" > "Checking/Operating Documents in a
Mailbox" in the User Guide.
O [Cause] One of the following may be the cause:
1) You have specified the mailbox registry for the scanned
document to the machine. However, optional Scanner Kit
is not installed.
2) You have not used the print driver for this machine.
3) The machine received a Secure Print, Mailbox Print,
Charge Print, or Private Print job with no HDD Extension
Kit installed.
[Remedy] For 1), press the <All Services> button, and check if [Scan
to PC] is displayed. If [Scan to PC] is displayed, then
check if the scanned document can be stored in a mailbox.
If unable to store in the mailbox, install optional Scanner
Kit.
For 2), use the print driver appropriate for this machine.
For 3), Check if the HDD Extension Kit is installed on the
machine.
If the HDD Extension Kit is not installed:
- If you do not need to use the feature, select [off] under
[Hard Disk] on the [Printer] tab of the print driver.
- If you need to use the feature, install the HDD Extension
Kit.
If the HDD Extension Kit is installed:
- If you need to use the feature, select [on] under [Hard
Disk] on the [Printer] tab of the print driver.
If the error persists even after following the listed solutions,
contact our Customer Support Center.
[Cause] The hard disk space is insufficient because Secure Print
users exceeded the allowed number.
[Remedy] Remove unnecessary documents from the machine, and
delete unnecessary Secure Print users.
For information about user deletion of Secure Print documents, refer to "9
Job Status" > "Printing and Deleting Stored Documents", and about deleting
documents, refer to "6 Send from Mailbox" > "Checking/Operating
Documents in a Mailbox" in the User Guide.
[Cause] Unable to print with the Sample Set feature because a
HDD Extension Kit is unattached or defective.
[Remedy] A HDD Extension Kit is required for the Sample Set
feature. If the HDD Extension Kit is defective, contact our
Customer Support Center.
[Cause] Unable to annotate due to insufficient hard disk space.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
[Cause] Unable to register the Delayed Print document because
HDD Extension Kit is unattached.
[Remedy] HDD Extension Kit is required to use the Delayed Print
feature.
Cause and Remedy
Error Code
14
373