Xerox DocuCentre-III C4100 Manual page 29

*1: Plain Reload Paper: Refers to the paper already printed on one side (i.e. scrap paper).
*2: Full color is not available.
2
*3: Only 106-128g/m paper fed from Tray 1, 2, or 3 is available.
*4: Gloss, HW Gloss, and Labels should be fed one by one from a paper tray.
*5: Extra Heavyweight or HW Gloss: If heavyweight or gloss paper is not loaded into the machine,
the paper needs to be slightly curled upward.
*6: Paper having coated surface on one side should not be fed from Bypass tray.
• When printing onto postcard or envelope, Extra Heavyweight should be selected, and the size
should be specified.
• Depending on heavyweight paper, the machine cannot load Short Edge Feed. In that case set the
paper Long Edge Feed.
• Depending on the type of paper used and the operating environment, paper may not feed to the
machine properly, or print quality may be negatively affected.
Unusable Paper
Using paper that is not recommended by Fuji Xerox may cause a paper jam or a
machine malfunction.
Use paper and OHP films recommended by Fuji Xerox.
Damp or wet paper
Paper pre-printed with other printer or copier
Wrinkled, creased, or ripped paper
Envelopes that are not flat, or that have clasps
Color paper with surface treatments
Paper with rough surface, such as pulp paper or fibrous paper
Storing and Handling Paper
Please keep the following points in mind when storing paper
Store paper inside a cabinet or in other dry place. Paper that has absorbed moisture
can cause paper jams and image quality defects.
After opening a package of paper, wrap up the remaining paper to store it. It is
recommended that you include moisture prevention packets.
Store paper on a flat surface to prevent bends or warping.
Please adhere to the following when setting paper into the tray
Align the stack of paper neatly before setting it in the tray.
Do not use paper that is folded, creased, or heavily warped.
Do not use waved or curled paper.
Do not load paper of mixed size together into the tray.
Transparency paper and label paper can cause paper jams, and multiple sheets can
be fed to the printer at once. Be sure to carefully fan these types of paper.
Paper Types
2
27